A R BituSeal membranes are high performance APP modified bitumen, double reinforced water proofing membrane for the protection of concrete bridge decks & roads.
It withstands high thermal shock & creates a homogeneous layer with the paving asphalt ,which meets the requirement of ASTM D 5147 std & UEAtc (The European Union of Agreement) MOAT 27-1983 & MOAT 64-2001.
It is made by saturating & coating reinforcements of spun bond non woven polyester & fiberglass mat with a homogeneous thermoplastic blend of APP (Atactic polypropylene), distilled bitumen & stabilizers.
The top surface of the membranes is covered with a PE film or sand & bottom surface is covered with logo printed design PE film.
|Minimum Order Quantity||50 Kg|
|Road Marking Type||BRIDGE PROTECTION|
|Usage/Application||It is suitable for Roads surfacing,Bridges,Drive ways,Parking Bays,Flyovers,Approach Roads & Pl|
|Property Type||Industrial Area|
|Bridge Height||100 MTR|
|Bridge Length||100 KM|
A R Bitu Mastic is a wearing course for Bridge decking & Road Surfacing work.
It is basically a composition of suitably graded mineral substance & bituminous cement in such a proportion so as to form a coherent, void less, impermeable mass.
It is hard but flexible at normal temperature & sufficiently fluid when heated around 180°C for easy spreading either by hand tools or by machines.
It confirms to IS 5317-87, it also confirms to specifications laid down by the Ministry of Roads & IRC.
It is suitable for Roads surfacing, Bridges, Drive ways, Parking Bays, Flyovers, Approach Roads & Platforms etc.
|Minimum Order Quantity||1 Kg|
|Brand||AR INDUSTRIES VADODARA|
|Form of Paint||Liquid|
|Paint base type||BITUMEN BASED|
Enhances structural strength by strongly binding loose aggregates Easy to apply and hassle free Prevent Raveling and Rutting Environment friendly Superior penetration into miniature pores of sub base Compatible with portland cement. Low temperature curing allows the binder to penetrate into sub base Prevent ingress of underground water into the pavements by plugging the capillary voids
A R Emulsion is ideally suited for Prime Coating on WMM/WBM surfaces and it has the abilitry to penetrate 8-10 mm deep into low porous WMM surface
TO ENSURE BEST RESULTS :
Use without diluting Bitumen Emulsion with any solvent - Use at ambient temperature - Roll the Bitumen Emulsion drums 5 times before using
A R Emulsion is available in - Bulk - RC Drums 200 Kg - MS Drums 200 Kg - HDPE Drumks 200 Kg